Storing Scanned Data - Canon imageRUNNER Advance C5255 Basic Operation Manual

Storing Scanned Data

This section describes the fl ow of basic Scan and Store operations. It also describes an example of how to store scanned data in a mail
box.
1
Placing Originals
Place the original on the feeder or the platen glass.
Placing originals in the feeder
Adjust the slide guides to fi t the size of your originals. Neatly place
your originals with the side to be copied face up.
Placing originals on the platen glass
Open the feeder/platen cover.
Place your originals face down.
Gently close the feeder/platen cover.
• If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/
PIN). If the Copy Card Reader-F1 is attached, fi rst insert a control card.
• If a login service, such as Department ID Management or SSO-H has been set, press
44
Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012
2
Selecting Function
Select [Scan and Store] from the Main Menu screen.
Press [Scan and Store].
Select [Mail Box] from the screen where you can select the type of
storage location.
(Log In/Out) to log out.