Main Power And Energy Saver Key - Canon IMAGERUNNER C2220i User Manual

Main Power and Energy Saver Key

This section describes how to use the main power switch and the Energy Saver key.
Do not connect or disconnect the power cord with wet hands, as this may result in electrical shock.
■
● How to Turn ON the Main Power
Make sure that the power plug is firmly inserted into the power outlet, and then turn ON the main power of the machine
following the procedure below.
1
("I" side)
■ Shutting Down the Machine
●
This machine performs a procedure to protect the memory when the machine is shut down. This enables the machine to be
shut down safely, even if there are any jobs being processed, or a MEAP application is running while the machine is shutting
down.
1
(" " side)
■
● Energy Saver Key
You can press to make the machine enter the Sleep mode and reduce power consumption.
If the machine is idle for a certain period of time, the machine will enter the Auto Sleep mode to minimize energy
consumption. Press to cancel the Sleep mode and resume normal machine operations.
38 Flow of Basic Operations
1. Open the main power switch cover.
2. Press the main power switch to the "I" side.
3
3. Close the main power switch cover.
•
If you are using a login service, log in using the procedure for the login service you are
using.
2
•
If you want to turn OFF the main power and then back ON again, wait for at least 10
seconds after the main power indicator is turned OFF before turning ON the main
power.
1. Open the main power switch cover.
2. Press the main power switch to the " " side.
3
3. Close the main power switch cover.
•
Do not turn the main power OFF while using Fax/I-Fax function. Sending or receiving
I-fax or fax documents cannot be done when the main power is turned OFF.
•
The machine may take some time to completely shutdown. Do not unplug the power
2
cord until the main power indicator of the machine is OFF.
•
If the main power is turned OFF during scanning or printing, a paper jam may occur.
2