Canon imageRUNNER Advance C5255 Basic Operation Manual page 176

Q&A
1
I want to make a rush copy, but I
cannot because of the long copy
job.
You can temporarily stop the
current copy job and give priority
to a rush copy by using the
Interrupt mode. You can also give
priority to a rush copy/print from
the Status Monitor/Cancel screen.
Interrupt Function:
1. Press [Copy]  [Interrupt].
2. Set the desired copy mode.
Interrupt/Priority Print
Function:
1. Press
2. Press [Copy/Print]  [Job Status] from
the [Print] drop-down list.
3. Select the job  press [Interrupt/Priority
Print].
4. Press [Interrupt and Print].
Additional Information
You can scan the original even if the
machine is waiting or printing (Reserved
Copying). For more information, see
e-Manual > Copy.
176
Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012
(Status Monitor/Cancel).
2
When copying, the Scan screen for
the next document is displayed.
Is there a way to not display this
screen?
When [Job Build] is set, the Scan
screen for the next document is
displayed. By canceling the [Job
Build] setting, the screen is not
displayed.
Canceling the Job Build mode
1. Press [Copy]  [Options]  [Job Build].
2. Press [Close].