Main Power And Energy Saver Key - Canon imageRUNNER ADVANCE C2225 Basic Operation Gude

Main Power and Energy Saver Key

The machine is provided with a main power switch and the Energy Saver key.
Do not connect or disconnect the power cord with wet hands, as this may result in electrical shock .
●
How to Turn ON the Main Power
Make sure that the power plug is firmly inserted into the power outlet, and then turn ON the main power of the machine following the
procedure below.
1. Open the main power switch cover.
2. Press the main power switch to the "I" side.
3. Close the main power switch cover.
• If you are using a login service, log in using the procedure for the login service
you are using.
• If you want to turn OFF the main power and then back ON again, wait for at least
10 seconds after the main power indicator is turned OFF before turning ON the
main power.
●
Shutting Down the Machine
This machine performs a procedure to protect the memory when the machine is shut down. This enables the machine to be shut down safely,
even if there are any jobs being processed, or a MEAP application is running while the machine is shutting down.
1. Open the main power switch cover.
2. Press the main power switch to the "
3. Close the main power switch cover.
• Do not turn the main power OFF while using the Fax/I-Fax function. Sending or
receiving I-fax or fax documents cannot be done when the main power is turned
OFF.
• The machine may take some time to completely shutdown. Do not unplug the
power cord until the main power indicator of the machine is OFF.
• If the main power is turned OFF during scanning or printing, a paper jam may
occur.
●
Energy Saver Key
You can press (Energy Saver) to make the machine enter the Sleep mode and reduce power consumption.
If the machine is idle for a certain period of time, the machine will enter the Auto Sleep mode to minimize energy consumption. Press the
(Energy Saver) to cancel the Sleep mode and resume normal machine operations.
12
" side.
1
3
("I" side)
2
1
3
(" " side)
2