Interface Selection - Datalogic QuickScan Mobile Quick Reference Manual

Read the Bind code to pair the QuickScan
5.
The reader is dedicated to the cradle. Any previously bound reader will
be excluded.
The green LED on the QuickScan Mobile reader will blink: the reader is
ready to be positioned onto the cradle.
Firmly position the reader onto the cradle within 10 seconds, a beep will
6.
be emitted, signaling that the QuickScan Mobile cradle has been paired
to the QuickScan Mobile reader.
YOUR READER IS NOW READY TO READ CODES.
Now you can configure the QuickScan Mobile cradle by reading
7.
configuration barcodes.

INTERFACE SELECTION

Follow the procedure to configure the interface required by your application.
Multi-standard interface models:
•
USB Interface
•
RS-232 Interface
•
Wedge Interface
•
Pen Interface
Bind
Ì$+RN0$-IÎ
QUICKSCAN
TM
Mobile reader to the cradle.
TM
MOBILE
9