Vermont Castings Signature VCS301 Series User Manual page 9

Signature series gas barbecue grill
Hide thumbs Also See for Signature VCS301 Series:
Table of Contents

Advertisement

Available languages

Available languages

Pr�Pane Gas FUel
WarnInG
Never use Natural Gas in a Grill that
has been configured to burn Propane
Gas, (and never use Propane Gas in
a Grill that has been configured to use
Natural Gas) to avoid possible bodily
injury. Always consult the Rating Label
on the back of the Grill to confirm that
it has been configured to burn Propane
Gas.
Always install the pressure regulator
and Type 1 propane gas supply cou-
pling and hose that has been provided
with your Propane Grill, as pictured in Figure 2.
Always install a standard 20 lb. propane cyl-
inder that has been equipped with a Type I
valve outlet as shown in Figure 3, and that is
12" in diameter and 18" in height. Always use
a propane cylinder that has been constructed
and marked in conformance with either the
specifications for LP Gas Cylinders of the U.S.
Department of Transportation or the specifi-
cations in the National Standard of Canada,
CAN/CSA-B339, Cylinder, Spheres and Tube
for Transportation of Dangerous Goods, as
applicable.
Always confirm that your propane cylinder is equipped with a
shutoff valve terminating in a Type I propane cylinder valve outlet
connection, and that it has been provided with a collar to protect
the cylinder valve.
Never install a propane cylinder in this Grill unless it is equipped
with a listed Overfill Protection Device (OPD).
Always have a new propane cylinder properly purged of air by
your certified propane gas dealer. Since a new cylinder is initially
filled with air, the air must first be purged before it is filled with
propane.
Always visually inspect the gas supply line for fraying, cracking
or rodent damage before each use of this Grill and, if necessary,
install a replacement hose and regulator obtained from the manu-
facturer prior to lighting this Grill.
• Always
place a dust cap on the cylinder valve outlet whenever
the cylinder is not in use and always install the dust cap that was provided with the cylinder valve. The
use of an incorrect dust cap could result in leakage of propane.
20302820
Check hose for breaks or
wear before each use.
Type 1 Connector
Regulator
Check hose for breaks or wear
before each use.
Type 1 Connector
To Main Burner
Manifold
To Side
Burner Valve
To Main Burner
Manifold
Figure 2a
Quick Connect for Reg-
ular Side Burner and
Optional Side Burner of
Built-in Models
Regulator
Figure 3
Shutoff Valve
Collar
Safety
Figure 2
B124
B232
B125
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents