Table of Contents
Advertisement
6.
Fold the printed sheet in half lengthwise as shown above.
7.
Determine the 1st adjustment for the Read Direction.
• After folding the test print in half parallel to its long edge as shown above, the adjustment value
in the Read Direction is the difference between the single vertical line and cross vertical line that
you can see when the folded sheet is held up to the light.
• If the difference is one calibration mark, for example, the adjustment is +1.0.
8.
Fold the sheet in half widthwise.
9.
Determine the 2nd adjustment for the Feed Direction.
• The value read after folding the sheet widthwise, is the adjustment value for the Feed Direction.
10.
Select "Adjustment" and push [#Enter].
11.
Select the paper tray and push [#Enter].
12.
Select the paper type and push [#Enter].
13.
Enter the adjustment for the Read Direction determined in Step 7 and push [#Enter].
14.
Enter the adjustment for the Feed Direction determined in Step 9 and push [#Enter]
15.
Push [Online] to leave the Menu mode.
Drive Cleaning
Follow the procedure below to do drive cleaning. Here are some important points you should know about
drive cleaning.
• Drive cleaning should be done only after head cleaning and head flushing fail to clean the print heads
successfully.
Image Correction
4
119
Advertisement
Table of Contents
Troubleshooting
