Installing The Battery - Nonin G02 ARCHIEVE User Manual

Installing the Battery

One 1.5 volt AAA-size (LR03) battery powers the GO
measurements. Nonin recommends using alkaline batteries (one is included with each
new GO Achieve). NOTE: You may use rechargeable batteries; however, they may
2
require more frequent replacement.
1. Remove the battery door located on the left side of the GO
towards you.
2. Insert one new 1.5 volt AAA-size battery. Follow the plus (+) and minus (-) markings
for battery direction (as shown inside of the battery compartment).
Achieve for approximately 2400
2
Achieve by sliding it
2
8