Advertisement
The spreader settings are guidelines only. The spreader should be calibrated prior to application to
ensure accuracy.
The spreader settings are based on a walking speed of 3 MPH. Walking faster or slower will alter
the spread application rate. Exact rates depend upon the spreader itself and the accuracy of the
person operating it.
CONSISTENT COVERAGE
To ensure consistent coverage, make sure each broadcast pattern slightly overlaps the previous
broadcast pattern as shown in the figure below. The approximate broadcast widths for different materials
are shown in the application chart.
Do not over apply spreading material. Follow the recommended coverage rate for each product.
Over application will lead to damage and contamination. If spreading material accidentally deposits
too heavily, soak the area thoroughly with a garden hose or sprinkler to prevent burning.
Operation Instructions
CAUTION
WARNING
- 15 -
Advertisement
