Timer Tx; Password Tx - Konica Minolta bizhub 42 User Manual

6.9 Settings - Comm. Settings

Timer TX

Specify the sending time. Transmitting faxes in discount telephone rate hours such as late at night or early in
the morning will reduce the cost. Use the Keypad to specify the communication starting time.
Reference
- It is specified in hours and minutes.
- You cannot specify the date.
- A maximum of 16 timer transmissions (including transmissions being redialed) can be queued.
- In order to send a timer transmission, the date and time must first be specified on the machine. For de-
tails on the date and time settings, refer to the [User's Guide Administrator Operations].
- This function cannot be used together with Internet Fax transmissions or polling reception.
- If the machine is off at the specified TX Start Time, the fax will be sent the next time that the machine
is turned on.

Password TX

This function sends documents with a password. If the recipient's fax machine is set to closed network re-
ception, the sender's fax machine should transmit the same password as used for the closed network recep-
tion.
You can use this function only when the remote machine is our model and supports the closed network re-
ception (with password) function.
Use the Keypad to enter the password.
Reference
- This function cannot be used together with F-code transmissions or polling reception.
bizhub 42/36
6
6-25