Redialing (G3); Auto Redialing - Konica Minolta bizhub 42 User Manual

6.12

Redialing (G3)

6.12 Redialing (G3)
Redialing refers to the operation to dial to the same destination again.
If a fax cannot be sent for example because the recipient's line is busy, the machine redials after a specified
period has elapsed.
6.12.1

Auto redialing

If a fax cannot be sent, for example because the recipient's line is busy, the machine automatically redials
the same destination for the number of redials specified in Line Parameter Setting.
The transmission job is handled as reserved job for redialing before the job is redialed.
bizhub 42/36
6
6-31