Security Setup; Setup - Winmate V270 User Manual

7.6

Security Setup

Two Levels of Password Protection provides both a Supervisor and a User password.
If you use both passwords, the Supervisor password must be set first. The system can
be configured so that all users must enter a password every time the system boots or
when Setup is executed, using either or either the Supervisor password or User
password.
The Supervisor and User passwords activate two different levels of password security.
If you select password support, you are prompted for a one to six character password.
Type the password on the keyboard. The password does not appear on the screen
when typed. Make sure you write it down. If you forget it, you must drain NVRAM
and reconfigure.
Select Security Setup from the Setup main BIOS setup menu. All Security Setup
options, such as password protection and virus protection, are described in this section.
To access the sub menu for the following items, select the item and press <Enter>:
Change Supervisor Password
Change User Password
Clear User Password
V270 Motherboard User Manual
44