Standard Cast Faceplate Installation - HAMPTON BAY HI300 Owners & Installation Manual

INSTALLATION
FACEPLATE CONTENTS LIST
Qty Description
Left Side Faceplate
1
1 Right Side Faceplate
1 Top Faceplate
2 Side Mounting Brackets
4 1/4" - 20 x 1/2" Hex Head Bolts
4 1/4" Lock Washers
4 1/4" Flat Washers
2 47" Insulations
1) Secure the Side Mounting Brackets (packaged with Faceplate)
to the left and right side of the fi rebox using 4 bolts per mounting
bracket as shown in the diagram below.
Side
Mounting
Bracket
Backside of Unit Shown.
12
CAST FACEPLATE
STANDARD CAST FACEPLATE
INSTALLATION
INSTALLATION
2)
Right Side
Faceplate
3)
Secure the Left and Right Side Faceplate to the fi rebox by align-
ing the Mounting Holes with the Side Mounting Brackets taking
care to align vertically while each side rests on the hearth. Secure
using 1 bolt per bracket.
Side Mounting
Bracket
Backside of Unit & Faceplate Shown.
Place Mantel Top onto the top of the fi rebox.
Mantel Top
With the Mantel Top in place check to make sure there is no gap
between the nut retainer and the underside cast of the Mantel
Top. If there is a gap present you will need to lower that side cast
by loosening 2 bolts, see step 6 for bolt location (check to see if
level).
HI300
Mounting
Hole
Left Side
Faceplate
Right Side
Cast
Hampton HI300 Wood Cast Insert