Tep By Step Programming; Setting The Quantity Beverage Per Decanter Or Switching Off The Decanter Option; Switching The Mixer On Or Off When Tapping Decanters - BRAVILOR BONAMAT Bolero 10 Operating Instructions Manual

1.10 Step by step programming (continued)
1. Select program "switching mixer on or
off". Figure 10 appears in the display.
2. Press the left-hand side of the setting
key à
(13) to switch the mixer off,
see fig. 11.
3. Press the right-hand side of the
ß (13) to switch the
setting key
mixer on, see fig. 10.
The default setting is: ON.
1.10.1 S
ETTING THE QUANTITY BEVERAGE
PER DECANTER OR SWITCHING OFF
THE DECANTER OPTION
1. Select program 'setting quantity per
decanter'. Figure 12 appears in the
display.
2. Press the right-hand side of the
ß(13) for a larger
setting key
quantity, (maximum approx. 720 ml).
3. Press the left-hand side of the setting
key à
(13) for a smaller quantity,
(minimum approx. 480 ml).
4. If the left-hand side of the setting key
à
(13) is pressed once again after
480 ml, a decanter appears that is
crossed out, see figure 13. This
setting means that no decanters can
be tapped - i.e. only cups.
5. The default setting is: 720 ml.
8
1.10.2 S
Both in drawing off cups as well as
decanters, you can choose to switch the
mixer on or off. This mixing provides a
layer of froth on for example the coffee.
In drawing off whole decanters, too much
froth can be produced. If this is the case,
then switch the mixer off. (The mixer
spins ones before stopping.)
Always switch on the mixer in using
ingredients with a high dosage, such as
chocolate. Failing to do so results in
blockages.
Fig. 12
Fig. 13
1. Select program "switching mixer on or
off". Figure 14 appears in the display.
2. Press the right-hand side of the
setting key
mixer on, see fig. 15.
3. Press the left-hand side of the setting
key à
4. The default setting is: OFF.
WITCHING THE MIXER ON OR OFF
WHEN TAPPING DECANTERS
ß (13) to switch the
(13) to switch the mixer off.
Fig. 14
Fig. 15