ENHANCED VISION Merlin User Manual page 26

Merlin with Color Select
Programming Color Select Options continued
Step 7) If you are finished, turn the Size dial to Exit and press Preset to leave
the set-up menu and return to normal use of your Merlin.
NOTE: If you are in the process of reprogramming an existing Color Select
mode, but after scrolling through the available choices (steps 3 and 4 above)
you decide to keep the existing color combination, turn the Size dial to
"Exit". Press the Preset button. This returns you to the main set-up menu. You
may now scroll to another Color Select mode for programming or
reprogramming, or to Exit to leave the set-up menu.
Turning Off a Color Select Mode
Merlin with Color Select can display up to nine viewing modes, the four
basic modes plus up to five Color Select modes. However, you can turn off
any of the Color Select modes so that Merlin will display only those Color
Select viewing modes you find most useful. (The four standard modes cannot
be turned off). The following steps provide you with information on how to
turn off a Color Select mode:
Step 1) Press and hold the MODE button until the words "ENTERING SETUP"
appear on your monitor.
Step 2) Turn the Size dial clockwise to scroll through the various menu
options until you reach the color select mode you wish to turn OFF.
Press the Preset button to select this color.
Step 3) Turn the Size dial clockwise until the word "OFF" appears on the
monitor. Press the Preset button to enter your choice into Merlin's
memory. This also returns you to the main set-up menu.
Step 4) Turn the SIZE dial to another color for further programming, or, if you
are finished, turn the Size dial to Exit and press Preset to leave the
set-up menu and return to normal use of your Merlin.
22