Setup Options; Entering Setup - ENHANCED VISION Merlin User Manual

If you have chosen the voice recognition model of Merlin, you can program
Merlin's setup options. There are six options you can select in setup mode:
Exit, Screen Messages, Voice Messages, Recognition, Train Me and Reserved.

Entering Setup

1. Turn the Size dial (#1 above) all the way counterclockwise, to the lowest size.
This will start you at the beginning of the menu when you enter setup.
2. Press and hold the Mode button (#2). Merlin will say and display "ENTERING
SETUP." Then the screen will fade to black and the word "EXIT" will appear.
3. Turn the Magnification dial to the right to select the different setup options.
4. Press the Preset button (#3) to activate or deactivate each option.

Setup Options

In clockwise order starting at Exit, the options you can program are:
Exit: When programming is complete, select this option and press Preset to exit.
Screen Messages: If Screen Messages are turned off, Merlin will not display
magnification sizes or viewing modes.
Voice Messages: If Voice Messages are turned off, Merlin will not verbally confirm
magnification sizes or viewing modes.
Recognition: This allows you to turn Merlin's Voice Recognition option on or off.
If this option is turned off, Merlin will not respond to spoken commands to change
sizes or modes.
You must first train Merlin to activate voice recognition.
Train Me: In this option you can program Merlin to respond to your spoken
commands to change magnification size and viewing mode. (See "Training Merlin
for Voice Recognition.")
Reserved: Available for future programming; cannot be programmed at this time.
Programming Setup Options
#3 #1 #2
17