Object Locator; Setting Magnification Presets - ENHANCED VISION Merlin User Manual

Your two favorite magnification sizes have now been programmed.
On the voice recognition model, Merlin will verbally confirm each
selection.
The level set with the Size dial overrides sizes arrived at by using the Preset
button. For example, if the Magnification dial is set to size 8 and then you
press Preset to go to a smaller size, the next time you turn the Magnification
dial to increase or decrease size it will immediately go to that new size.
Merlin's Object Locator feature can help you quickly locate something you're
looking for on a page, or a specific part of an object you want to view more closely.
To locate the desired object:
1. Press and hold the Preset button. Merlin will
automatically zoom out to the widest field of view,
and a "target" (as shown in Figure 1) will appear in
the center of the monitor screen. Continue to hold
the button down.
If you hold the button down for more than 10
seconds the target will disappear.
2. Use the X-Y table and move your work or reading material until you have
located the desired item within the "target" area.
3. Release the button and Merlin will magnify the item you located within
the targeted area.

Setting Magnification Presets

13

Object Locator

I---I
figure 1