Voiding A Standard Key Code - Yamaha 2003 FJR1300 Service Manual

6. Check that the engine can be started with the two registered standard keys.
NOTE:
The flashing stops when 5 seconds elapse and the registration mode is finished. In this case, the
second standard key cannot be registered and only the first standard key is registered.
Standard key
SWITCH
registration
method
LED

Voiding a standard key code:

If you lose one standard key that you used and you want to make the lost standard key unable to be
used anymore, re-register another standard key. To re-register, refer to "Standard key registration".
This re-registration disables the lost standard key because its key code has been changed.
SWITCH
Standard key
code (lost one)
LED
voiding method
less than 5.0 s
ON
Code re-regis-
tering key
OFF
ON
OFF
less than 5.0 s
ON
Code re-regis-
tering key
OFF
ON
OFF
IMMOBILIZER SYSTEM
less than 5.0 s less than 5.0 s
First standard
key
Registration mode
Blinking ends when the registration of the sec-
ond unregistered standard key is complete.
less than 5.0 s less than 5.0 s
Remaining
standard key
– 139 –
ELEC
Registration of the
second unregis-
less than 5.0 s tered standard key
is complete.
Second standard key
Registration mode
Blinking ends when it elapses 5 seconds
elapses and the registration for the sec-
ond standard key is impossible.
– +