Yamaha 2003 FJR1300 Service Manual page 25

È To the radiator fan
É Pass the wire harness, stator coil lead, coolant
reservoir hose, and
breather hose through the left slit of the plate.
Ê To the right side of the frame
Ë Fasten the wire harness with the plastic band
attached to the frame.
Ì To the fuel tank
Í Pass the stator coil lead through the fork in the
wire harness.
thermostat assembly
– 17 –
CABLE ROUTING
Î Fasten the clutch hose with the hose holder
attached to the frame.
Ï Insert the harness holder into the hole at the rear
end of the frame.
Ð Pass the brake hose through the brake hose
holder.
Ñ To the wire harness
Ò Contact the clutch hose to the turn stopper.
SPEC