Ñ Support the coolant reservoir hose and coolant
reservoir breather hose with the hose holder
located under the coolant reservoir.
Ò Pass the coolant reservoir breather hose
through the hole of the coolant reservoir
breather hose holder.
Ó Fasten spark plug leads #1 and #4 at the num-
ber mark.
Ô Pass the wire harness, spark plug leads #1, #2,
#3, and #4 through the right slit of the battery
bracket.
CABLE ROUTING
Õ Pass the starter motor lead, negative battery
lead, wire harness, and spark plug leads #2 and
#3 through the battery stay. Be sure to pass the
starter motor lead and negative battery lead on
the battery stay side.
– 15 –
SPEC