Malfunction Code 42 (Rear Wheel Does Not Recover From The Locking Tendency Even Though The Signal Is Continuously Transmitted From The Ecu (Abs) To Re - Yamaha 2003 FJR1300 Service Manual

ANTI-LOCK BRAKE SYSTEM (FJR1300A)
5) Hydraulic unit solenoid coupler terminal
• Check if the front and rear hydraulic unit solenoid coupler terminals (hydraulic unit and sub-wire
harness [ABS]) are reversed.
Front
Rear
6) Hydraulic unit
If the malfunction is not corrected after performing steps 1) to 5), replace the hydraulic unit. Be sure
to connect the brake hoses and couplers correctly and securely. Check the hydraulic unit operation.
(Refer to "[D-6] Final check".)
• [C-5-11] Malfunction code 42 (Rear wheel does not recover from the locking tendency even
though the signal is continuously transmitted from the ECU (ABS) to release the hydraulic
pressure [when the battery voltage is normal].)
Check the following:
1) Rotation of the rear wheel
• Check that there is no brake drag on the rear wheel and make sure it rotates smoothly.
• Check for brake disc distortion.
2) Brake master cylinder and brake caliper
• Check that the brake fluid pressure is correctly transmitted to the brake disc when the brake
pedal is operated and that the pressure decreases when the pedal is released.
3) Brake fluid
• Visually check the brake fluid in the brake master cylinder reservoir and check the fluid for water,
foreign materials, solidification and contamination.
• Check for air in the brake hose lines.
4) Brake hose lines
• Check the brake hose lines for kinks and deterioration (particularly between the hydraulic unit
and the rear brake caliper).
WARNING
_
Only use genuine Yamaha parts. Using other brake pipes, hoses and union bolts may close
the brake hose lines.
Terminal color
Solenoid
white, white
red, red
– 96 –
Sub-wire harness (ABS)
red, green
red, white
CHAS