Yamaha 2003 FJR1300 Service Manual page 49

1 Brake hose (front brake master
cylinder to hydraulic unit)
2 Brake hose (rear brake master
cylinder to hydraulic unit)
3 Brake hose (hydraulic unit to
rear brake caliper)
4 Brake hose (hydraulic unit to
front brake caliper)
5 Hydraulic unit solenoid coupler
6 Fail-safe relay
7 ABS motor coupler
CABLE ROUTING
8 Sub-wire harness (ABS)
9 Hydraulic unit
0 Hydraulic unit drain plug
È To the ECU (ABS)
É Install the brake hose with the
yellow paint mark facing up.
Ê Install the brake hose with the
blue paint mark facing up.
Ë Contact the brake hoses to the
hose stoppers.
– 41 –
SPEC
Ì Contact the bracket claw to the
hydraulic unit.
Í Insert the hydraulic unit drain
plug with the white paint mark
facing down.
Î 5 ~ 7 mm