Yamaha 2003 FJR1300 Service Manual page 28

È Connect the wire harness and right handlebar
switch lead.
É Pass the left handlebar switch lead, immobilizer
lead, main switch lead, headlight lead, and
clutch hose through the hole on the left side of
the frame.
Ê Pass the right handlebar switch lead and throttle
cables through the hole on the right side of the
frame.
Ë To the lower left slit of the plate
CABLE ROUTING
Ì To the cylinder identification sensor
Í To the fuel tank
Î Pass the cylinder identification sensor lead
through the lead guide of throttle body.
Ï Pass the lead wire above the fuel return hose.
Ð To the sidestand switch lead
Ñ Pass the cylinder identification sensor lead
under the fuel hose, then to the wire harness.
– 20 –
SPEC