8.1.2
Software Installation
After setting BIOS as section 8.1.1 shown and installing OS, such as Windows
®
Windows
8, when you install Ethernet driver, please check DashClient (see section
7.2). Then it turns the device into a DASH enabled computer on the client side. You can
use a console device with Realtek Management Console installed to control and monitor
a remote DASH enabled computer (see section 8.2.1).
8.2
Console Side
8.2.1
Management Console Tool
Please install Realtek Management Console under Windows
version above Vista, such as Windows
Discovery
You can use Discovery page to find computers capable of ASF or DASH. In the
discovery phase, you can find ASF or DASH manageable computers by giving a range
of IP addresses along with port lists and protocols specified. When computers are found,
they would be shown in the window. By double clicking the found IP, a Manageability
page would appear. Figure 6 shows the results when finding a range of computers from
192.168.0.1 to 192.168.0.255. In addition to the current found devices, computers ever
discovered are also listed in the left pane of the window.
DASH User Guide
PICO121 AMD G-Series Embedded SoC Pico-ITX Board
®
7 and Windows
Figure 6: Discover Manageable Devices
®
Vista or Windows
®
Server 2008.
®
7 or
®
with
85
Need help?
Do you have a question about the PICO121 and is the answer not in the manual?
Questions and answers