About Documents And Decals; Introduction; Symbols In Documents - Danfoss DHP-A Service Instructions Manual

1

About documents and decals

1.1

Introduction

The following documents are available for this product:
•
Installation instructions containing information to install and commission a heat pump installation. Supplied
with the heat pump on delivery.
•
The service instructions contain information about the heat pump's function, accessories, fault tracing and
technical data. The instructions also contain tips and advice that should be followed before a heat pump
installation. It is therefore recommended that the instructions are read before installation.
The service instructions are available for download as below.
•
The electrical instructions that contain the wiring diagram for the heat pump intended for fault tracing and
service. The electrical instructions are available for download as below.
•
The maintenance instructions must handed over and gone through with the end customer. Supplied with the
heat pump on delivery.
•
Country specific instructions and forms are available where relevant. Supplied with the heat pump on delivery.
•
Self-adhesive decals with translation text. Must be placed on the manufacturing plate in conjunction with
installation. Supplied with the heat pump on delivery.
The Service instructions and Electrical instructions are available for download here:
www.documentation.heatpump.danfoss.com
1.2

Symbols in documents

The instructions contain different warning symbols, which, together with text, indicate to the user that there are
risks involved with actions to be taken.
The symbols are displayed to the left of the text and three different symbols are used to indicate the degree of
danger:
DANGER! Indicates an immediate danger that leads to fatal or serious injury if necessary measures are not
taken.
Warning! Risk of personal injury!Indicates a possible danger that can lead to fatal or serious injury if
necessary measures are not taken.
Caution! Risk of installation damage.Indicates a possible hazard that can lead to item damage if necessary
measures are not taken.
A fourth symbol is used to give practical information or tips on how to perform a procedure.
Note! Information regarding making the handling of the installation easier or a possible operational
technical disadvantage.
Service instructions VMGFC302 – 3