Danfoss DHP-A Service Instructions Manual page 73

DHP-L Opti
Antifreeze
Number of units
Dimensions L x W x
H
Weight empty
Weight filled
Sound power
11
level
Measurements have been carried out on a limited number of circulation pumps, which can give variations in results. Tolerances in the measurement methods can also give
variations.
1) At B0W35 according to EN14511 (including circulation pumps).
2) At B0W45 according to EN14511 (including circulation pumps).
3) According to IEC61000.
4) Heat pump with 3 kW auxiliary heater (1-N 1.5 kW).
5) Heat pump with 6 kW auxiliary heater (1-N 3 kW).
6) Heat pump with 9 kW auxiliary heater (1-N 4.5 kW).
6 8
mm
kg 145 150
kg 151 157
dB(A) 44 44
7) The pressure that must not be exceeded outside the heat pump without falling below the
nominal flow. For the cooling circuit, these valves require pipe dimension Ø 40 x 2.4.
8) Nominal flow: Heat circuit Δ10 K, cooling circuit Δ3 K.
9) Fuse phase L1 (size 4 has 1-phase compressor).
10) The values apply to new heat pumps with clean heat exchangers.
11) Sound power level measured according to EN ISO 3741 at BOW45 (EN 12102).
*) Not available for this version
10 12
Ethylene glycol/ Ethanol
1
690x596x1538
155 165
162 172
47 48
Service instructions VMGFC302 – 71
16
175
184
50