Danfoss DHP-A Service Instructions Manual page 75

DHP-L Opti Pro
Dimensions L x W x
H
Weight empty
Weight filled
11
Sound power level
Measurements have been carried out on a limited number of circulation pumps, which can give variations in results. Tolerances in the measurement methods can also give
variations.
1) At B0W35 according to EN14511 (including circulation pumps).
2) At B0W45 according to EN14511 (including circulation pumps).
3) According to IEC61000.
4) Heat pump with 3 kW auxiliary heater (1-N 1.5 kW).
5) Heat pump with 6 kW auxiliary heater (1-N 3 kW).
6) Heat pump with 9 kW auxiliary heater (1-N 4.5 kW).
6 8
mm
kg 150 155
kg 156 162
dB(A) 45 42
7) The pressure that must not be exceeded outside the heat pump without falling below the
nominal flow. For the cooling circuit, these valves require pipe dimension Ø 40 x 2.4.
8) Nominal flow: Heat circuit Δ10 K, cooling circuit Δ 3 K.
9) Fuse phase L1 (size 4 has 1-phase compressor).
10) The values apply to new heat pumps with clean heat exchangers.
11) Sound power level measured according to EN ISO 3741 at BOW45 (EN 12102).
*) Not available for this version
10 12
690x596x1538
160 170
167 177
45 49
Service instructions VMGFC302 – 73
16
180
189
50