Danfoss DHP-A Service Instructions Manual page 69

DHP-H Opti Pro
Number of units
Dimensions L x W x
H
Weight empty
Weight filled
Sound power
level 11
Measurements have been carried out on a limited number of circulation pumps, which can give variations in results. Tolerances in the measurement methods can also give
variations.
1) At B0W35 according to EN14511 (including circulation pumps).
2) At B0W45 according to EN14511 (including circulation pumps).
3) According to IEC61000.
4) Heat pump with 3 kW auxiliary heater (1-N 1.5 kW).
5) Heat pump with 6 kW auxiliary heater (1-N 3 kW).
6) Heat pump with 9 kW auxiliary heater (1-N 4.5 kW).
6 8
mm
kg 231 231
kg 411 411
dB(A) 45 42
7) The pressure that must not be exceeded outside the heat pump without falling below the
nominal flow. For the cooling circuit, these valves require pipe dimension Ø 40 x 2.4.
8) Nominal flow: Heat circuit Δ10 K, cooling circuit Δ3 K.
9) Fuse phase L1 (size 4 has 1-phase compressor).
10) The values apply to new heat pumps with clean heat exchangers.
11) Sound power level measured according to EN ISO 3741 at BOW45 (EN 12102).
*) Not available for this version
10 12
1
690x596x1845
231 240
411 420
45 49
Service instructions VMGFC302 – 67
16
244
424
50