Side Cover Removal; Removing The Rack Top Frame For Clearance Through Doorways - IBM eserver pSeries 690 Installation Manual

| | | |
5
| |
| | | |
6
| |
| | | |
7
|
|

Side Cover Removal

|
|
1. Always remove the right side cover first.
|
2. Remove the (2) Screws and washers inside the frame (P/N's 77G0599 and
|
|
3. Remove the (3) Screws at the top of the frame (P/N's 54G2882). The use of a step
|
|
4. With all the screws removed, rock the cover to the right from the top. There are
|
|
|
|
|
5. Follow steps 2 and 3 for removing the left hand cover.
|
6. With all the screws removed from the cover, tilt the top of the cover away from the
|

Removing the Rack Top Frame for Clearance Through Doorways

1. Use the jack screws to stabilize and lift the rack off the floor.
108
pSeries 690 Installation Guide
PN44P0126 Right Cover
PN54G2882 Screw
PN11P3600 Left Cover PN44P0125
Screw
PN44P0105 Front Cover
1625437).
ladder is recommended for this procedure.
features built into the cover that lock it behind the left hand cover - these need to
clear before you can lift the cover from the frame. Tilting the top of the cover away
from the frame after the feature tabs have cleared the left hand cover makes lifting
the cover easier.
frame and lift off.
a. Loosen the jam nut on each leveling foot by turning the nut counter-clockwise.
b. Rotate each leveling foot downward until it contacts the surface on which the
rack is placed.
c. Adjust the leveling feet downward as needed until the rack is level. When the
rack is level, tighten the jam nuts against the base by turning the nut clockwise.
13 PN05N6585 J Bracket PN
2665528 Screw
14 PN44P0126 Right Cover PN
54G2882 Screw
15 PN44P0125 Left Cover PN
54G2882 Screw