Verify Installation Is Complete By Using The Hmc Interface - IBM eserver pSeries 690 Installation Manual

|

Verify Installation is Complete by Using the HMC Interface

|
|
The HMC provides a predefined user called hscroot . The hscroot password is abc123.
|
This hscroot user ID is a member of the System Administrator role. When the console is
|
powered on for the first time, use this user ID to log in. After you are logged in, you can
| create additional users.
| Note: If the customer is installing a second pSeries 690, the HMC may have been
|
|
|
|
|
After you power on your HMC, the HMC login window displays, and prompts you to
| enter your user ID and password.
|
You might request that a special user ID be created for the Service Representative role
|
to perform service functions.
| After the installation is complete, thepSeries 690 displays on the HMC interface. It may
|
take a few minutes for a new system to display in the user interface after the cable is
| connected. When you log in to the HMC, the HMC management window opens, and the
|
management environment is already selected. Select Partition Management to see the
|
list of managed systems.This window is divided into the Navigation area and the
|
Contents area. The management window looks similar to the following illustration:
|
|
|
The panel on the left (the Navigation area) displays a hierarchy of icons that represent
| collections of systems, individual systems, managed resources, and tasks. Each
| Navigation area icon identifies an application. At the highest point, or root of the tree, is
| the Management Environment. The Management Environment contains one or more
72
pSeries 690 Installation Guide
preinstalled, and the hscroot password has probably been changed. If the HMC
was already present from a previous installation, ask the customer for a login ID.
The customer may have already set up a special login for a service
representative; if so, use this login ID.