Using Authentication Unit - Konica Minolta bizhub36 Users Manual Network Administration

7.1

Using authentication unit

7 Authentication unit
This chapter describes the Authentication Unit AU-201.
1. Authentication Unit AU-201
7.1 Using authentication unit
The Authentication Unit AU-201 is an "IC card authentication" system that reads the IC card to perform per-
sonal authentication. Using this system, you can perform authentication with an IC card to log in to this ma-
chine or execute a print job when User Authentication is enabled in this machine.
To use the authentication unit, first register the card ID of the user in this machine. The registered user, who
is authenticated with the card ID, can log in to this machine or execute a print job. This section explains how
to configure the required settings in this machine, and register users.
NOTICE
Authentication Unit AU-201 must be installed inside the Working Table WT-510.
Do not disconnect the USB cable while using the authentication unit. Doing so may cause the system to be-
come unstable.
Do not leave the IC card within 1-9/16 inch (40 mm) of the card reader.
bizhub 42/36
1
7
7-3