In Netware 4.X Remote Printer Mode (Nds); In The Netware 4.X/5.X/6 Print Server Mode (Nds) - Konica Minolta bizhub36 Users Manual Network Administration

5.7 [Network] tab
Item
[Print Queue Scan
Rate]
[Bindery/NDS]
[Preferred File
Server]

In NetWare 4.x Remote Printer mode (NDS)

1
From the client, log in the NetWare file system with administrator authority.
2
Start NWAdmin.
3
Select an organization or department container for the print service, and select [Print Services Quick
Setup] from the Tools menu.
4
Fill in [Print Server Name], [Printer Name], [Print Queue Name], and [Print Queue Volume]. Then, set the
[Type] of the printer to [Other/Unknown] and save them.
5
Load the PSERVER.NLM file on the NetWare Server console.
Then, configure the following settings in [NetWare Setting].
Item
[IPX/SPX]
[Ethernet Frame
Type]
[NetWare Print
Mode]
[Printer Name]
[Printer Number]

In the NetWare 4.x/5.x/6 Print Server mode (NDS)

0 When you select the Print Server mode, the IPX protocol must already be loaded on the NetWare server.
1
From the client, log in the NetWare file system with administrator authority.
2
Start NWAdmin.
3
Select an organization or department container for the print service, and select [Print Services Quick
Setup (non-NDPS)] from the Tools menu.
4
Fill in [Print Server Name], [Printer Name], [Print Queue Name], and [Print Queue Volume]. Then, set the
[Type] of the printer to [Other/Unknown] and click [Create].
Then, configure the following settings in [NetWare Setting].
Item
[IPX/SPX]
[Ethernet Frame
Type]
[NetWare Print
Mode]
[Print Server Name]
bizhub 42/36
Description
Set a job inquiry interval.
Select [Bindery/NDS].
Enter the priority file server name to be used in the Bindery
emulation mode (up to 47 characters, excluding / \ : ; , * [
] < > | + = ? .).
Description
Select [Enable].
Select a frame type to be used.
Select [NPrinter/RPrinter].
Enter a printer name to be operated as the NPrint-
er/RPrinter (up to 63 characters, excluding / \ : ; , * [ ] < > |
+ = ? .).
Enter the NPrinter/RPrinter number.
Description
Select [Enable].
Select a frame type to be used.
Select [PServer].
Enter a print server name to be operated as PServer (up to
63 characters, excluding / \ : ; , * [ ] < > | + = ? .).
5
Prior check
Prior check
Frame type
The print server
name specified in
Step 4
Prior check
Frame type
The print server
name specified in
Step 4
5-137