In Remote Printer Mode Using The Netware 4.X Bindery Emulation; In Print Server Mode Using The Netware 4.X Bindery Emulation - Konica Minolta bizhub36 Users Manual Network Administration

5

In Remote Printer mode using the NetWare 4.x Bindery Emulation

0 When you use the Bindery Emulation, make sure that the Bindery Emulation has been enabled on the
NetWare server.
1
From the client, log in the NetWare file system as Bindery with the administrator authority.
2
Start Pconsole.
3
Select [Quick Setup] from [Available Options] list box, and press the Enter key.
4
Fill in [Print Server Name], [Printer Name], and [Print Queue Name]. Set the [Type] of the printer to [Oth-
er/Unknown], and save them.
5
Terminate Pconsole by pressing the Esc key.
6
Load the PSERVER.NLM file on the NetWare Server console.
Then, configure the following settings in [NetWare Setting].
Item
[IPX/SPX]
[Ethernet Frame
Type]
[NetWare Print
Mode]
[Printer Name]
[Printer Number]

In Print Server mode using the NetWare 4.x Bindery Emulation

0 When you use the Bindery Emulation, make sure that the Bindery Emulation has been enabled on the
NetWare server.
0 When you select the Print Server mode, the IPX protocol must already be loaded on the NetWare server.
1
From the client, log in the NetWare file system as Bindery with the administrator authority.
2
Start Pconsole.
3
Select [Quick Setup] from [Available Options] list box, and press the Enter key.
4
Fill in [Print Server Name], [Printer Name], and [Print Queue Name]. Set the [Type] of the printer to [Oth-
er/Unknown], and save them.
5
Terminate Pconsole by pressing the Esc key.
Then, configure the following settings in [NetWare Setting].
Item
[IPX/SPX]
[Ethernet Frame
Type]
[NetWare Print
Mode]
[Print Server Name]
[Print Server Pass-
word]
5-136
Description
Select [Enable].
Select a frame type to be used.
Select [NPrinter/RPrinter].
Enter a printer name to be operated as the NPrint-
er/RPrinter (up to 63 characters, excluding / \ : ; , * [ ] < > |
+ = ? .).
Enter the NPrinter/RPrinter number.
Description
Select [Enable].
Select a frame type to be used.
Select [PServer].
Enter a print server name to be operated as PServer (up to
63 characters, excluding / \ : ; , * [ ] < > | + = ? .).
Enter a print server password if necessary (up to 63 char-
acters).
[Network] tab 5.7
Prior check
Frame type
The print server
name specified in
Step 4
Prior check
Frame type
The print server
name specified in
Step 4
bizhub 42/36