Travis Industries 33 DVI GSB2 Owner's Manual page 38

38 Optional Equipment
7. Install the LP manifold cover included in the owner's pack (see below).
8. Install the LP pilot orifice following the directions below.
(a) Use a 7/16" open-end wrench to remove the pilot hood.
(b) Remove and discard the Natural Gas (NG) orifice. Place the LP orifice in the pilot assembly then replace
the pilot hood, tightening the pilot hood until it is snug (do not over-tighten).
a
9. Replace the firebox components.
© Travis Industries
(
for qualified installers only)
Natural Gas Orifice = .020N (3way)
.018N (2way)
LP (Propane) Orifce = .014LP
7/16" Wrench
4140813
b
.020N
or
.018N
.014LP
100-01297