Load Printer; Turning On The Power; Load Ribbon - DuraLabel LabPRO Quick Start Manual

Always turn OFF the printer when loading
supplies. Always wait at least 5 seconds before

1. LOAD PRINTER

See the Load Printer section (pages 3-10) in the User's Guide for a more
detailed explanation of supply loading.
The ribbon and various print media for the DuraLabel
optimized for compatibility and print quality. Only authorized supplies from
Graphic Products will print correctly in the DuraLabel
For more information about supply loading, please view the supply loading
video on the installation CD.

Load Ribbon

**IMPORTANT**
Always turn OFF the power first!
The following instructions are for loading 4.3" ribbon supply. See To Load 2.5"
Ribbon Supply section (page 6) in the User's Guide for instructions on how to
load 2.5" ribbon supply.
1. Open the Ribbon Mechanism Cover. (See Figure 1)
Figure 1
-  -
**IMPORTANT**

turning ON the power.

LabPRO have been
®
LabPRO.
®
Clear Window
Ribbon Mechanism Cover
(Push down to open)
LED Indicator
Feed Button
Printer Top Cover
Printer Cover Release Lever