Definition Of Access Levels On The Infinity Panel; Functions Required By European Standard En 54 Part 2 - Zeta INFINITY 8 Installation Manual

INFINITY 8 INSTALLATION MANUAL

1.6 DEFINITION OF ACCESS LEVELS ON THE INFINITY PANEL

ACCESS LEVEL ACCESSED BY
1 General public
2 Responsible person
3a Installer/Engineer
3b Installer/Engineer
4 Authorised Service
Engineer

1.7 FUNCTIONS REQUIRED BY EUROPEAN STANDARD EN 54 PART 2

The Premier Quatro fire alarm control panel provides the following mandatory and optional functions as prescribed by the
European standard EN 54 Part 2.
(a) Mandatory Functions
The mandatory functions and corresponding indications provided by this panel are:

fire alarm

fault warning

disabled,

quiescent
(b) Optional Functions
The options with requirements provided by this panel are:

output to fire alarm devices (i.e. sounders)

delays to outputs

Test Mode
Approved Document No. GLT-201-7-1
Issue: 1.6 Author: NRPJ
ACCESS METHOD
Default state
Access code entered
Access code entered & Installer password
Open enclosure
Open enclosure & PC programming software Update panel firmware
Date: 27/7/2012
FUNCTIONS ACCESSED
View panel
Override delay (if used)
LED test
Start/stop sounders
Silence buzzer
Reset panel
Enable/disable sections of system
Test mode
Set sounder delay time
Connect wiring during install
Battery check during Maintenance
Set configuration switches
PAGE 3