Panel Menus - Zeta Premier EXPRO User Manual, Maintenance Manual & Log Book

EXPro User Manual

PANEL MENUS

To access the panel requires the user code to be entered (the default code is 2222). Once the
Controls Active LED is on you will now be able to start and stop the first stage sounders, reset,
silence the inter buzzer and access the relays configuration menu.
Press enter and you will then see a list of menu options:
1. Zone
2. Logs
3. Disable
4. Test
5. Engineer
6. Relays
7. Change Time
Zone: This menu allows the user / engineer to view the following information:
Logs: The Log can store up to 249 events. Use the NEXT and PREV buttons to scroll through the
events.
Disable: Allows the user/engineer to disable each of the inputs and outputs on the panel
Use the NEXT and PREV button to cycle through items that can be disabled, pressing OK
toggles the item between the enabled/disabled states:
NOTE: During the disabled condition, sections of the extinguishing system will be
inoperative. Extra caution should be used in the disabled part of the premises.
Approved Document No: GLT-212-7-2
Issue: 1.1 Author: NRPJ Date: 14/07/2014
*** Zone Viewing ***
Zone 1
Normal
Voltage Lvl: 17.3v
*** LOG ***
12:00 05/02
Man. Release Active
01/95
*DISABLEMENT MENU *
Low Pressure input
ENABLED
Page 9