Error Messages - Martin MAC 250 Krypton User Manual

E
RROR MESSAGES
Display readout
MERR (Memory error)
****
COER (Color wheel time-out)
RGER (Rot. gobo time-out)
FGER (Fixed gobo time-out)
GOER (Gobo index time out)
LERR
shER
bTER
PAER
TIER
dRER
dPER
34
Appears if...
...the EEPROM memory cannot be
read.
... there is no communication between
the control panel and motherboard.
This appears briefly when switching on
the fixture.
...the magnetic-indexing circuit
malfunctions (e.g. sensor defective or
magnet missing).
...the lamp cannot be struck.
....there is a short circuit and the lamp
is struck without a command.
...the temperature in the base is too
high
...if there is a pan error and the sensor
cannot find the pan index point
...if there is a tilt error and the sensor
cannot find the pan index point
...if there is a drive current error.
...if there is a display programming
error.
Table 5: Error messages
MAC 250 Krypton
What to do
• Contact service technician.
• Check fuses.
• Check cable between control panel and
motherboard.
• Reinstall software.
• Contact service technician.
• After the time-out, the effect in question
stops in a random position.
• Contact service technician.
• Replace the lamp
• Contact service technician.
• Ensure that the fans are clear and func-
tioning and that the ambient temperature
does not exceed 40° C (104° F)
• Contact service technician if the problem
persists.
• After the time-out, the fixture stops in a
random position.
• Contact service technician.
• After the time-out, the fixture stops in a
random position.
• Contact service technician.
• Contact service technician.
• Contact service technician.
C