Error Messages; Restriking The Discharge Lamp - Martin Mania EFX500 User Manual

E r r o r m e s s a g e s
In the event of an error, the following messages appear in the fixture
display:
7 0 1
Gobo wheel error (all fixtures). There is a problem with the gobo
wheel positioning system.
7 0 2
Hot restrike protection (EFX600, EFX700 and EFX800). You have
tried to restrike a lamp by DMX within 8 minutes of extinguishing the lamp
via DMX.
7 0 3
Color paddlewheel error (EFX800). There is a problem with the
color paddlewheel positioning system.
If an error message is displayed, try powering the fixture off and then on
again to reset it. If the problem persists, contact your Martin dealer.
R e s t r i k i n g t h e d i s c h a r g e l a m p
If the discharge lamp in the EFX600, EFX700 and EFX800 is powered off
via DMX during operation, you must wait eight minutes before the lamp
can be restruck.
If you try to strike the lamp anyway, the message
display.
Operation
7 02
will appear in the
25