Using Your Main Oven(S) - Belling RICHMOND 1100 DF Service Manual

The main oven may be controlled by the programmer (see
The Programmer/Clock for details).
The programmer, if fitted must be set to manual before it
can be used, or programmed.
Switching on the multifunction oven
Use the function control knob to select the function you
G
wish to use - see the functions table for details.
Note: You can change function during cooking if you
wish, as long as the oven is in manual mode.
Turn the temperature control knob to the temperature
G
you wish to use.
The thermostat indicator will come on to show that the
G
oven is heating, and once the temperature is achieved,
it will go out.
To switch off the main oven, simply turn the control
G
knob back to the 'G ' position.
The cooling fan will come on during use, and may con-
G
tinue to run for some time afterwards.
Using Your Main Oven
16
i Important: Never
place food, or dishes on
the base of the main
oven, the element is
here and it will cause
over heating.