Changing Light Bulbs - Belling RICHMOND 1100 DF Service Manual

Warning: There is a risk of electric shock, so always
make sure you have turned off and unplugged your
appliance.
Not all appliances have the same number and type of
bulbs. Before replacing your bulb, open the top/main
oven door and see which type you have. Then use the
table to help you change your bulb correctly.
Please remember that bulbs are not covered by
your warranty.
Bulbs can be purchased from hardware stores (always
take the old bulb with you).
No. of Bulb
lamps Location
2 side
(@25W)
1 rear
(@25W)
1 rear
(@25W)

Changing Light Bulbs

Oven Instruction for
type changing the bulb
All Wait until the oven is cool,
then remove
shelves.
Grasp the lens cover on the
light fitting and pull it away
from the side of the oven.
Unscrew the bulb.
Fanned / Wait until the oven is cool,
Multifunction then remove the shelves.
The oven light is at the rear
of the oven cavity.
Remove the loose oven back
- unscrew the 4 securing
screws (one at each corner).
Unscrew the lens cover (turn
anticlockwise). Unscrew the
bulb and replace.
lens cover and replace oven
back.
Conventional Wait until the oven is cool,
then remove
shelves.
The oven light is at the rear
of the oven cavity.
Unscrew the lens cover (turn
anticlockwise). Unscrew the
bulb and replace.
lens cover.
the oven
Replace
the oven
Replace
31
There is no need to remove
the oven back on the 90DF
model.