Connections; Connection Terminal Strips - socomec Netys RT Installation And Operating Manual

4. CONNECTIONS

Connection to the mains power supply and to the load(s) must be made using cables of suitable cross section, in accordance with
current standards.
If not already provided, install a PDU panel allowing isolation of the mains supply upstream of the UPS. The panel must be equipped
with an automatic switch rated high enough to handle the current draw on full load, and with a residual current device.

4.1 CONNECTION TERMINAL STRIPS

OUT 230 V~
IN 230 V~
14 5-11 kVA - Ref.: IOMNETRTXX01-GB 05
COM. SLOT
PARALLEL RS232
EPO
5 kVA
7 kVA
OUT 230 V~
IN 230 V~
PARALLEL RS232
EPO
9 kVA
11 kVA