Page 1
NETYS PL 6 0 0 - 8 0 0 V A 安装及操作手册 Installations- und bedienungsanleitung Manual de instalación y uso Manuel d’installation et d’utilisation Installation and operating manual Manuale di installazione e uso Installatie– en bedieningshandleiding Dokumentacja Techniczno-Ruchowa Manual de instalação e funcionamento Manual de instalare şi utilizare...
Page 2
During the warranty period, SOCOMEC UPS reserves the right to decide whether the product should be repaired, or whether to replace defective parts with new parts, or used parts that are equivalent to new parts in terms of functionality and performance.
Read the manual carefully before connecting the unit to the a.c. mains supply and to the downstream appliances. Before the UPS NETYS PL is put into commission, the user must be perfectly familiar with its operation, with the position of all the controls and with the technical and functional characteristics of the unit, so as to ensure there will be no risk to any persons or to the appliance itself.
DESCRIPTION OF THE SYMBOLS USED ON LABELS ATTACHED TO THE UNIT All precautions and warnings on labels and plates on the inside and outside the equipment should be observed. DANGER! HIGH VOLTAGE (BLACK/YELLOW) GROUND TERMINAL READ THE USER MANUAL BEFORE USING THE UNIT NETYS PL - Ref.: IOMNETPLXX01-GB 02...
NETYS PL is an Uninterruptible Power Supply designed to power computers and connected peripherals, with the exception of any other electrical device (such as household appliances, television sets, stereo systems and video recorders).
Please read the following before installing the UPS. • NETYS PL has been designed for use in closed environments. • Place the UPS on a flat, stable surface, in a ventilated environment away from heat sources and exposure to direct sunlight.
IN 230 V~ Connect the UPS power cord to the mains power supply. OUT 230 V~ 2 load connection sockets for surge protection. IN 230 V~ Connect the UPS power cord to the mains power supply. NETYS PL - Ref.: IOMNETPLXX01-GB 02...
Overloads are signalled by a rapid sounding acoustic alarm. WARNING! Significant overloads could cause permanent damage to the UPS! Avoid connecting laser printers that generate absorption peaks liable to cause overloads on the UPS. NETYS PL - Ref.: IOMNETPLXX01-GB 02...
All NETYS PL models are equipped with a USB communication interface (not available on the standard model). 7.1. SOFTWARE OPTIONS Software for monitoring and shutdown can be used on NETYS PL thanks to its USB connection. These solutions have been specially designed for the efficient management of power protection devices.
If the equipment is to be left unused for a long period, wait for the batteries to charge fully before switching off. While the UPS is not being used ensure the batteries are recharged for 24 hours at least once every 4 weeks. NETYS PL - Ref.: IOMNETPLXX01-GB 02...
0÷40 °C (15÷25 °C for optimum battery life) Environment Humidity: 90% non-condensing Reference standards EN 62040-1 (safety), EN 62040-2 (EMC) Mechanical characteristics Dimensions (W x D x H) 220 x 220 x 123 mm Net weight 3.6 kg 4.1 kg NETYS PL - Ref.: IOMNETPLXX01-GB 02...
Page 16
SALES, MARKETING AND SERVICE MANAGEMENT SOCOMEC GROUP SOCOMEC UPS Paris S.A. SOCOMEC capital 11 149 200 € - R.C.S. Strasbourg B 548 500 149 95, rue Pierre Grange B.P. 60010 - 1, rue de Westhouse - F-67235 Benfeld Cedex F-94132 Fontenay-sous-Bois Cedex - FRANCE Tel.
Need help?
Do you have a question about the NETYS PL and is the answer not in the manual?
Questions and answers