Yeastar Technology MyPBX U300 Installation Manual
Hide thumbs
Also See for MyPBX U300:
- Administrator's manual (129 pages) ,
- Extension user manual (10 pages) ,
- How to use (3 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Administrator's Manual
Advertisement
Table of Contents
Related Manuals for Yeastar Technology MyPBX U300
Summary of Contents for Yeastar Technology MyPBX U300
- Page 1 MyPBX U300 Installation Guide MyPBX U300 Installation Guide Version:V1.1 Yeastar Technology Co., Ltd Date: 9 , Aug, 2013 http://www.yeastar.com1/15...
-
Page 2: Table Of Contents
3.2.1 Connection of Ethernet Ports ........................7 3.2.2 Connection of E1/T1 ports ........................7 3.2.3 Connection of FXS ports........................... 9 3.2.4 Power Connection ..........................10 3.2.5 Overall Flow Chart ..........................10 4. MYPBX U300 BASIC CONFIGURATIONS .......... 11 4.1 F ............................11 ACTORY EFAULTS 4.2 L... -
Page 3: Preparation Before Installation
This Guide explains how to install MyPBX U300, how to configure MyPBX U300 via web interface, how to add extensions, and make/receive calls via PSTN lines. -
Page 4: Hardware Specifications
MyPBX U300 Installation Guide 2. Hardware Specifications 2.1 Overview Figure 2-1 MyPBX U300 2.2 LED Indicators and Ports Figure 2-2 MyPBX U300 Front Panel http://www.yeastar.com4/15... - Page 5 RJ11 ports FXS port: For the connection of analog phones. Ethernet ports MyPBX U300 provides two 10/100M adaptive RJ45 Ethernet ports, marked as LAN and WAN. -LAN port: LAN port is for the connection to Local Area Network (LAN). -WAN port: WAN port is the network port for the connection to internet. It supports ‘DHCP server’,‘PPPoE/dynamic DNS’, and “static IP”...
-
Page 6: Specifications And Operating Environment
MyPBX U300 Installation Guide 2.3 Specifications and Operating Environment Description Size L213 * W 160 * H 44 (mm) Power Supply 220V,50~60Hz Operating Temperature 0°C~50°C 32°F~122°F) Storage Temperature -10°C~65°C 14°F~149°F) Operating Humidity 5%~90% Non-condensing) Storage Humidity 0%~95% Non-condensing) Weight 1.2kg... -
Page 7: Mypbx U300 Installation
ADSL modem. LAN Port Connection Connect one end of a network cable to the LAN port of MyPBX U300, and the other end to any port of company’s LAN switch/router. If the LAN port is connected to PC directly (not via a switch), please use cross-over cable. - Page 8 Step 1: Connect MyPBX U300 E1 port to the E1 line according to the line sequence of E1 port. From the above table, we can see that the No.1 and No.2pins of MyPBX U300 E1 port is for receiving data (No.1 for receiving data -, No.2 for receiving data +), while No.4 and No.5 is for transmitting data (No.4 is...
-
Page 9: Connection Of Fxs Ports
MyPBX U300 Installation Guide Figure 3-2 Connection of E1/T1 port 3.2.3 Connection of FXS ports The FXS port could be connected to an analog phone with a phone line. The connection could be depicted as below: Figure 3-3 Connection of FXS ports... -
Page 10: Power Connection
Once users have made sure that device installation, cable connection and power type is correct, please switch on the power. Then MyPBX U300 will start booting. In the meantime, users would see that the ‘POWER’ and ‘RUN’ indicator lights would turn on. -
Page 11: Mypbx U300 Basic Configurations
MyPBX U300 Installation Guide 4. MyPBX U300 Basic Configurations 4.1 Factory Defaults MyPBX U300 provides web-based configuration interface for administrator and account user. The user can manage the device by log in the web interface. The factory default IP address: LAN: 192.168.5.150;... -
Page 12: Logging In The Web Configuration Panel
MyPBX U300 Installation Guide 4.2 Logging in the Web Configuration Panel Firstly, please check if the IP address that assigned to the network port (LAN or WAN) is in the same segment with the PC and which can be connected when commit ‘Ping +MyPBX IP address’ command. Start the browser on PC. -
Page 13: Network Settings
MyPBX U300 Installation Guide 4.3 Network Settings After logging in the admin configuration interface, generally the first step is to configure the IP address. If both the WAN and LAN ports are connected to the network, their IP addresses need to be configured. If not, just configuring the IP address of the LAN port which is connected to the local area network of the company is OK. -
Page 14: Configuring Terminals
MyPBX U300 Installation Guide 4.5 Configuring Terminals MyPBX could be connected with SIP-based audio and video IP terminal devices (e.g. IP Phone, voice gateway, and soft terminal, etc.). The steps of configuring terminals are as below: Step 1: Make sure the IP terminal and MyPBX are interconnected Step 2: Enter the IP address of MyPBX when configuring “SIP server”, “Proxy server”, or “Registration server”... -
Page 15: Conclusion
MyPBX U300 Installation Guide 5. Conclusion This Installation Guide only explains the installation and basic settings of MyPBX U300 for making and receiving calls. For more functionality and advanced settings of MyPBX U300, please refer to the relative documents as below: “MyPBX U300 Datasheet”...
Need help?
Do you have a question about the MyPBX U300 and is the answer not in the manual?
Questions and answers