Bosch GCM 10 Operating Instructions Manual page 12

GCM10_ASIA.book Seite 4 Dienstag, 18. September 2007 9:40 09
Symbol Name
SW Wrench width (in mm)
Left rotation/Right rotation
/ Hex socket drive/Square drive
Arrow
Alternating current
Direct current
Alternating or direct current
Class II construction
Protection class I
(Grounding terminal)
Warning symbol
Warning symbol
Symbols specifically for this Machine
Symbol Meaning
Warning symbol
Warning symbol
Warning symbol
Note symbol
1 619 P04 359 • (2007.09)
Meaning
Distance between parallel surfaces on fastener el
ements on which the tool must fit on (e.g. hex nuts
or hex head screws), fit over (e.g. ring wrench) or
fit in (e.g. socket head screws).
Direction of drive rotation
Type of tool holder
Action in the direction of arrow
Type or a characteristic of current
Type or a characteristic of current
Type or a characteristic of current
Designates double insulated constructed tools
Machines of the protection class I must be ground
ed
Alerts user to warning messages.
Read and understand instructions before opera
tion
Provides information for correct handling, e.g.,
read the operating instructions.
Danger area! Keep fingers, hands or arms away
from these areas.
Wear protective glasses.
Wear hearing protection.
Observe the dimensions of the saw blade. The
hole diameter must fit the tool spindle without play.
Do not use reducer pieces or adapters.
English–4