Computer - Progear Fitness 1113 Owner's Manual

COMPUTER

SPECIFICATIONS:
TIME ---------------------------------------------- 0:00-99:59 MIN: SEC
SPEED ------------------------------------------- 0.0-999.9 MPH
DIST (DISTANCE) ----------------------------- 0.00-99.99 MILE
CAL (CALORIES) ------------------------------ 0.0-999.9 KCAL
ODO (ODOMETER) -------------------------- 0.00-99.99 MILE
PULSE ------------------------------------------- 40-200 BEATS/MIN
USING YOUR COMPUTER
The computer can be activated by pressing the button or by pedaling. If you leave the
equipment idle for 4 minutes, the power will turn off automatically.
BUTTON FUNCTIONS:
Press the button to select the function of the computer.
Press and hold the button for 3 seconds to reset all data values to zero except the
ODO (ODOMETER) data values.
COMPUTER FUNCTIONS:
SCAN: Automatically scans each function in sequence with change every 6 seconds.
NOTE: If you do not want to use the SCAN function, press the button to select one of the
other functions.
TIME: Displays your elapsed workout time in minutes and seconds.
SPEED: Displays the current training speed.
DIST (DISTANCE): Displays the cumulative distance traveled during workout.
CAL (CALORIES): Displays approximate amount of calories burned during workout.
(This data is a rough guide for comparison of different exercise sessions and should not
be used in medical treatment).
ODO (ODOMETER): Displays the total accumulative distance traveled. The
ODOMETER data values can not be clear to zero by pressing and holding the button for
3 seconds. If you take out the batteries from the computer, the ODOMETER data
values will clear to zero.
PULSE: Displays your current heart-rate readings after you grip the handlebar pulse
sensors with both your hands during exercise. To ensure the pulse readout is more
precise, always hold on to the handlebar pulse sensors with both hands instead of one
hand when you are trying to monitor your heart-rate reading.
15