Progear Fitness 1113 Owner's Manual page 13

74
81
80
34
87
Tool:
Allen Wrench with Phillips Screwdriver 5#
4. Back Cushion Frame and Back Cushion Installation
Attach the Back Cushion Frame (76) onto the Seat Post (5) with two M8 Nylon Nuts (34),
two Ø8xØ25x1.5 Big Washers (62), and two M8x50 Carriage Bolts (78). Tighten nylon
nuts with the Double Open End Wrench provided.
Attach the Back Cushion (74) onto the Back Cushion Tube (87) with four M8x45
Hexagon Socket Bolts (80) and four Ø8 Spring Washers (81). Tighten bolts with the
Allen Wrench with Phillips Screwdriver provided.
Hardware:
(80) Hexagon Socket Bolt M8x45
(78) Carriage Bolt M8x50
2 PCS
ASSEMBLY
5
62
78
76
4 PCS
(62) Big Washer Ø8xØ25x1.5
5
Double Open End Wrench 13#, 15#
2 PCS
12
(81) Spring Washer Ø8
4 PCS
(34) Nylon Nut M8
2 PCS