Progear Fitness 1113 Owner's Manual page 12

6
81
60
5
Tool:
Allen Wrench with Phillips Screwdriver 5#
3. Seat Cushion and Seat Post Installation
Remove four M8x15 Hexagon Socket Bolts (60) and four Ø8 Spring Washers (81) from
underside of the Seat Cushion (6). Remove bolts with the Allen Wrench with Phillips
Screwdriver provided.
Align bolt holes on underside of Seat Cushion (6) with holes on top of Seat Post (5), then
attach with four M8x15 Hexagon Socket Bolts (60) and four Ø8 Spring Washers (81) that
were removed. Tighten bolts with the Allen Wrench with Phillips Screwdriver provided.
Connect the Extension Hand Pulse Sensor Wire I (33) from the Front Frame (2) to the
Extension Hand Pulse Sensor Wire II (90) from the Seat Post (5).
Insert the Seat Post (5) into the seat post bushing on the tube of the Front Frame (2).
Adjust seat position and insert the M16 Seat Height Adjustment Knob (14). Turn the
M16 Seat Height Adjustment Knob (14) in a clockwise direction to tighten.
ASSEMBLY
6
33
5
90
12
2
11
14