Progear Fitness 1113 Owner's Manual page 15

90
5
75
89
6. Computer Installation
Connect the Extension Hand Pulse Sensor Wires III (89) from the Handlebar (75) to the
Extension Hand Pulse Sensor Wires II (90) from the Seat Post (5).
Install the Computer Bracket (10) to the Computer Post (4) by sliding the Computer
Bracket (10) into the Computer Frame (4), using four M6x12 Hexagon Socket Bolts (32)
and four Ø6 Spring Washers (35). Tighten bolts with the Allen Wrench with Phillips
Screwdriver provided.
Plug the Sensor Wire (15) from the Computer Frame (4) into the SENSOR receptacle on
the back of the Computer (9).
Plug the Extension Hand Pulse Sensor Wire I (33) from the Computer Frame (4) into the
PULSE receptacle on the back of the Computer (9).
Hardware:
(32) Hexagon Socket Bolt M6x12
ASSEMBLY
9
10
15
33
4
35
4 PCS
Tool:
32
35
Allen Wrench with Phillips Screwdriver 5#
32
(35) Spring Washer Ø6
4 PCS
14