Progear Fitness 1113 Owner's Manual page 11

Hardware:
(28) Big Curve Washer Ø8xØ25x1.5
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
Important:
Please make sure the right foot
pedal matches up with the right
crank and the left foot pedal
matches up with the left crank.
If reversed the cranks may
become damaged or stripped.
2
2. Left and Right Foot Pedals Installation
The Cranks, Pedal Shafts, Foot Pedals, and Pedal Straps are marked "R" for Right
and "L" for Left.
Insert the pedal shaft of Left Foot Pedal (7L) into threaded hole in the Left Crank (23L).
Turn the pedal shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip
the threads.
Tighten the pedal shaft of Left Foot Pedal (7L) with the Double Open End Wrench
provided.
Insert pedal shaft of Right Foot Pedal (7R) into threaded hole in Right Crank (23R).
Turn the pedal shaft by hand in the clockwise direction until snug.
Tighten pedal shaft of Right Foot Pedal (7R) with the Double Open End Wrench
provided.
ASSEMBLY
4 PCS
23L
23R
(29) Hexagon Nut Cap M8
Important:
Screw Right Foot Pedal (7R)
into right crank clockwise!
Screw Left Foot Pedal (7L)
into Left crank
counter-clockwise!
7L
Tool:
Double Open End Wrench 13#, 15#
7R
10
4 PCS